Variant: Embossing with Enamel or Wire Inlay
变体：压花与填漆/掐丝结合
标签：填漆, 珐琅, 掐丝, 凹槽
压花后可在凹陷纹槽填入珐琅釉或环氧树脂色胶：①压出 0.3–0.6 mm 深凹槽 ②清洗脱脂 ③点填釉料并刮平 ④低温固化（树脂 80–120 ℃）或窑烧（珐琅 750–820 ℃）⑤打磨抛光。亦可在凸纹间掐银丝分隔色块，形成景泰蓝式效果。
After embossing, fill the sunken grooves with enamel or colored epoxy: ① press 0.3–0.6 mm deep grooves ② degrease ③ apply and scrape level ④ cure low-temp (resin 80–120 ℃) or kiln-fire (enamel 750–820 ℃) ⑤ grind and polish. You can also set silver wire between reliefs to separate colors, giving a cloisonné-like effect. ---