Case: Sculptural Recycled-copper Repoussé Pendant
案例：再生铜雕塑感浮雕吊坠
标签：再生铜, 首饰设计, 浮雕吊坠, 补焊, 可持续
独立设计师用 1.0 mm 再生铜板制作 60×40 mm 山形浮雕吊坠：激光扫描泥稿放样，背面顶出主峰（深 6 mm），正面收细部，全程退火 3 次；再生铜杂质使弯角处两度微裂，以 0.3 mm 银焊补合并顺势纳入肌理。成品保留局部氧化黑斑做新旧对比，抛光后涂微晶蜡封护，凸显可持续材料的独特质感，售价提升约 40%。
A studio jeweller formed a 60×40 mm mountain-relief pendant from 1.0 mm recycled copper: laser-scanned maquette layout, main peak pushed 6 mm deep from the back, front detail chased, three anneals total. Inclusions caused two small corner tears, closed with 0.3 mm silver solder and worked into the texture. Oxide blooms were kept for contrast, then polished and sealed with microcrystalline wax—the sustainable look lifted the price about 40%.